AL.170 Heartbeat or NodeGuarding warn – Delta servo troubleshooting

<= See All alarms of Delta servo

Name Description ALM WRN SRV ON Clear
Way

AL.170

Heartbeat or
NodeGuarding
warn

Heartbeat or
NodeGuarding error
  Yes

NMT:Reset node/

0x6040.Fault Reset

Causes Checking Method Actions
CANopen communication breaks Check if CANopen communication and connection is normal.

NMT:Reset node or

0x6040.Fault Reset

     

(The above information is referenced from Delta Electronics IMSBU)

See ALL Alarms <=        ↓ The following content is contributed by users ↓

Other reasons Checking Method Actions

Bad communication quality ?

(V-Archer)

  1. Is the original isolation line used?
  2. Is the terminating resistor connected?
  1. It is recommended to use the original shielded communication cable to avoid noise interference!
  2. Connect terminal resistors to improve communication quality
  3. Note: Delta’s CAN and DMCNET’s ˋ terminal resistance is different, please choose correctly!
     

Sharing is a virtue. Please add the inadequacies of this article to benefit the public —

Leave a Reply