本篇提供 本站 與 相關產品 的 更新訊息,包括 網站新聞,韌體更新,文件發布 … 等.可點選 功能表 => News 隨時查看!
日期 | 內容 |
2017/5/26 |
M-R 燒錄韌體工具 M_R_DSP_V121更新
|
2017/5/18 |
台達 ezASD 軟體 V3.0.1.98 發布
|
2017/5/15 |
台達 ASD-A2 定點停車 韌體 公布 |
2017/5/12 |
台達 ASD-M-R 程式設計指南 上架
|
如有任何問題,請於下方留言,謝謝!
Hello Author, How can i purchase the trainer kit of ASD-A3 that you have include in your site. How can i get training documents ASD-A3 Backup and DOP-100 Backup files
I am not sure if the demo kit can be ordered. As I know it is internal used. You can check the following page for the training document. http://smartservo.org/delta-a3-servo-training-doc/
Hi sir, Thanks for your reply.
Recently i am trying to learn your article “A2 Cam Example: Fixed Length Film Feeding (1)-Basic Operation” but during my learning period i am facing some problems. Can i share with you if you have any Wecheat or whatsapp or email address. my wecheat +8801743745654 email sysautotech@gmail.com
For cam related issues, please refer to the following articles : (http://smartservo.org/a2_ecam_no_run/),(http://smartservo.org/a2-ecam-q-and-a/). or E-mail your question to archer@smartservo.org , but there is no guarantee that you can get a reply immediately because it is beyond the service range of this site !
你好
請問人機 ,如何直接讀取M-R
xyz三組參數
485站號如何設定
p3-0無法寫入,如何取消防寫功能
祝好
使用 RS-485 與 M-R 通訊,請設定 P3-05=1
X 軸參數站號為 P3-00
Y 軸參數站號為 P3-00+1
Z 軸參數站號為 P3-00+2
PLC 記憶體站號 P3-00+3
哪個參數無法寫入?如有其他問題請到 M-R 產品專頁發問,以便讓M-R 版主看到,謝謝!