Arduino source code for Magnus effect vertical axis wind turbine released

Software release for Magnus effect VAWT

This article provides the Arduino source code and usage instructions for the Magnus effect vertical axis wind turbine experimental device. Combined with the previously disclosed circuit diagram, mechanical parts list, and 3D printing STL file, this interesting experiment can be easily implemented. Anyone who is interested can download it and enjoy it ! The dynamic demonstration of this experimental device is shown in the following video:

Read more

Darrieus wind turbine 3D printing files released, you can also build one yourself

Darrieus wind turbine 3D files open

This article provides 3D printing .STL files, documentation and pictures of the Darrieus wind turbine experimental device, etc. Those who are interested can download it and actually make it to play with! The Darrieus wind turbine is a lift-type vertical axis wind turbine with high rotation speed and high efficiency. It is a subject worth studying. The experimental equipment of this project is shown in the video below :

Read more

Magnus Effect Vertical Axis Wind Turbine project files released, you can also build one yourself

3D STL files of Magnus VAWT

This article provides the project files of the Magnus effect vertical axis wind turbine experimental device, including 3D printed (STL) files, mechanical parts list, circuit diagram, etc. Anyone who is interested in making one can download it and try it out ! The device of this project is shown in the video :

Read more

Magnus Effect Vertical Axis Wind Turbine Realistic Demonstration

Magnus Effect Vertical Axis Wind Turbine Realistic Demonstration

Since the Magnus effect was described in 1852, it is natural to try to drive wind turbines with it. As for the horizontal axis wind turbine, its structure is not difficult to understand as shown in the figure below. However, if it is implemented as a vertical axis wind turbine, the rotation directions of the cylindrical rotor on the windward side and the leeward side must be opposite, so that the torques will not cancel each other out, so as to drive the wind turbine. In the early days, it could only be made by means of gears and connecting rods, which was difficult to achieve because the structure was too bulky. In recent years, thanks to the rapid advancement of semiconductor technology, microcontroller and motor drive technology has matured, it is no longer difficult to realize this concept. The following video shows this original concept in the real world …

Read more

High-efficiency but difficult to self-start Darrieus wind turbine experiment – VAWT (2)

Darrieus Turbine icon

According to the literature, the Darrieus vertical axis wind turbine characterized by high efficiency but it is difficult to be self-starting. I couldn’t understand when I first came into contact with it. Since high efficiency means that it has torque, why can’t it start by itself? Later I realized that its efficiency must appear at a higher speed (similar to the high gear of a car), As for how high the speed should be? Usually 2~6 times faster than wind speed. This puzzles me even more, because the wind turbine is driven by the wind, why can it revolve faster than the wind speed? It seems that an experiment must be done, seeing is believing …

Read more

Basic principles and types of Vertical Axis Wind Turbines-VAWT(1)

Basic principles and types of Vertical Axis Wind Turbines-VAWT(1)

Due to the need for environmental protection and the fight against global warming, the development of renewable energy is urgent. In addition to solar energy, wind energy has attracted the most attention. In order to use wind energy, mankind has invented Wind Turbine for centuries. The wind turbine can convert wind energy into the rotating mechanical energy, and the torque generated by its main shaft can be used to drive a load, such as a generator or a water pump, for power generation or irrigation. According to the direction of the rotation axis, wind turbines can be divided into two types: horizontal axis and vertical axis.

Read more