<= See All alarms of Delta servo
Name | Description | ALM | WRN | SRV ON | Clear Way |
---|---|---|---|---|---|
AL.011 Encoder Error |
The encoder produces abnormal pulse | ⊗ | No | re-power on |
Causes | Checking Method | Actions |
---|---|---|
Wrong wiring of the encoder | Check if the wiring follows the suggested wiring of the user manual. | Correct wiring |
The encoder is loose | Check the drive connector of CN2 and encoder | Install the encoder again |
Bad connection of the encoder | Check if the connection between CN2 of the drive and the encoder of the servo motor is loose | Reconnect the wiring |
The encoder is damaged | Check if the motor is damaged | Change the motor |
(The above information is referenced from Delta Electronics IMSBU)
See ALL Alarms <= ↓ The following content is contributed by users ↓
Other reasons | Checking Method | Actions |
---|---|---|
— Sharing is a virtue. Please add the inadequacies of this article to benefit the public —