AL.013 Emergency stop error – Delta servo troubleshooting

<= See All alarms of Delta servo    => More emergency stop functionsProtection func List table

Name Description ALM WRN SRV ON Clear
Way

AL.013

Emergency stop

Emergency stop DI.EMGS(0x21) is activated   No set DI.EMGS to off to clear the alarm

Causes Checking Method Actions
The emergency stop button is pressed. Make sure the emergency stop button is off. Set DI.EMGS to off to clear the alarm.

(The above information is referenced from Delta Electronics IMSBU)

See ALL Alarms <=        ↓ The following content is contributed by users ↓

Other reasons Checking Method Actions

Unconnected emergency stop switch

(Archer)

If the application does not require emergency stop protection, this alarm can be disabled, ref. => Delta A2 Servo Quick Start and FAQ

     

Sharing is a virtue. Please add the inadequacies of this article to benefit the public —

3 thoughts on “AL.013 Emergency stop error – Delta servo troubleshooting

Leave a Reply